WELCOME This site is for anyone interested in Olympus and OM System system cameras. First time visit? Check out our FAQ. You need to REGISTER before you can post. After registration and two posts, forum ads will disappear.
* Registered members don't see ads on the forum after two posts - sign up for free *
** We are aware that image uploading is currently not working properly and we're working on it. We're very sorry for the inconvenience and hope we can return to normal ASAP. **
Hi, I'm after some lens cases for my m43 lenses however most of the ones I've found are too big made for bigger dslr lenses I was looking at the Olympus cs-21/22 however they are pretty expensive for a bit of neoprene I was wondering if any of you have found something similar but cheaper ideally with a closed top either zip or Velcro and not draw string. Any help/suggestions appreciated thanks guys!
P.s have Olympus 45, 12-50 and a Panasonic 25mm lenses
I use the neoprene ones from Ebay. As you say, even the small ones are too large, so I have a cunning plan. I stick two rear lens caps together back to back. That way I can accommodate two lenses safely in one case!
Stephen
A camera takes a picture. A photographer makes a picture
Hi Steve, i wonder if you would know if the lensbaby case would take the PL 25mm? or if you have internal dimensions which could help me work it out? Thanks in advance
Raj
Hi Raj, can't find official internal measurements on the web and very difficult to measure as lid needs to be in place to measure! but the case wall is only 2/3mm thick so hight would be 78-80mm, Dia 68-70mm so probably be to big for 25mm pancake lens.
Hi Steve, That sounds fine i have the PL25 1.4 not the Pana 20 1.7 which is the pancake so its about 6cm tall maybe 6.5cm with the filtre, seems like two of these would cover my 45 and 25 lenses, i would have to keep the hood seperate for the 25 but thats ok its more the lens i want to protect. Thanks!
Raj
I use one of these bought from ebay
fits the 12-50 like a glove, it will take the 45mm but there is a bit of room left so you may be able to fit both the PL25 & 45mm, unfortunately I don't have a PL25 to test.
We process personal data about users of our site, through the use of web browser cookies and other technologies, to deliver our services, and to analyse site activity. No banner advertising is shown to members logged in to the site. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment